Tips For Replacing Your Bathtub Drain

Bathtub drains occasionally need to be replaced, and drains with the built in stoppers are the ones that usually have problems. These will with time become harder to use and will slowly allow water to leak while the tub is supposed to be plugged, as well as hold water when they are supposed to drain. These are the reasons that you cannot properly rinse off your ankles in the shower in many cases. In time your bathtub drain stopper mechanism will need to be repaired or replaced. This is actually a minor repair that most do-it-yourselfers are willing and able to tackle. You will need to have on hand some plumber's putty, channel locks (or other wrench), a Philips screwdriver, and the replacement part for the bathtub drain you are replacing as well as a few cleaning rags.

Start by removing the old bathtub drain plug mechanism. This has a face plate in the tub which has two screws attaching it to the tub. Once you remove the cover plate you will gain access to the rest of the assembly. Simply grasp it and remove through the hole it was installed in.

Bathing Accessories

If you have any broken pieces you have a couple choices; if you have access to the other side of the wall the easiest thing to do is open the wet wall panel and make the repair in the open space but this is usually not an option. The most likely scenario is you are going to have to fish out the parts in a very small amount of space. A piece of wire, or a wire hanger, straightened into a hook works well.

Once you have fished out all of the old pieces you merely need to clean up, and reassemble and reinstall the pieces. Often you can repair this type of draining mechanism without having to replace any of the parts by simply cleaning it up and putting it back together correctly.

For those drains that do need to be replaced you need make sure your new parts are the same as the old parts were. Changing to different sized parts when you are working with plumbing is not a good idea, unless you like having your home flooded.

Test the parts, make sure everything is in good working order. If the stopper fits in and plugs the pipe properly you are ready to install the bathtub drain stopper. If not you need to get the right equipment first.

Plumbers putty should be used on all of the pipes and flanges where they attach to one another to make sure they seal well. The mechanism that lifts and lowers the stopper needs to be attached to the overflow plate. Before you seal the plate down make sure the stopper is working properly by testing it. If the tub is holding water and draining the water back out at appropriate times you are ready to seal the plate down.

You need to smear some plumbers putty on the plate and then put it in place and screw it down. You can then clean up any excess plumber's putty. Make sure that you haven't covered the overflow vent and you are finished. Your bathtub drain should work as good as new.

Tips For Replacing Your Bathtub Drain

http://buyshoesasics.blogspot.com/ http://buyhunting-optics.blogspot.com/

Replacing Your Bathroom Accessories

Bathroom accessories provide the finishing touches to any new bath project. Whether you are looking for ultra-modern wall mounted accessories or more traditional counter top accessories; towel bars, soap dish, toilet paper holder, and so forth, which ties together the room's design elements.

Updating the Look of Your Bath is Quick & Simple. No matter the type of accessory; it needs to be fastened securely to the wall. Plastic inserts are driven into a hole drilled in the wall and expand when a screw is inserted; they're best for light-duty applications. Try to attach at least one mounting screw of an accessory to a wall stud. Bathroom accessories can be installed in less than two hours.

Bathing Accessories

To make sure your bath looks organized and clutter-free, use your best judgment in determining the proper number or bathroom accessories for your bath. Once you have determined your style, you should then take accurate measurements of your bath. A general rule is two-to-three counter accessories, such as a toothbrush holder, cup holder and soap dish.

Many fixture manufacturers have created bathroom accessories to coordinate with their sinks, toilets, and tubs to take the guesswork out of selection. Proper ventilation is necessary to keep damp clothes and towels from mildewing. Laundry hampers come in many colors and finishes, made of several materials including wicker, vinyl and wood.

Make a Statement in Your Bath with Stylish Accessories. Once you have selected the specific finish for your bathroom, the next step is determining the style and size you prefer. You'll pick the finish, style and number of accessories to match your bathroom décor.

Replacing Your Bathroom Accessories

http://buybeautybodywashes.blogspot.com/ http://beautybathbodycleansers.blogspot.com/

Replacing Ceramic Accessories in the Bathroom

Broken soap dishes, towel racks and grab bars are replaceable--but as a rule should not be duplicated. In most cases it is easier to use one that is attached differently.

Most accessories are originally set into tile walls with portland cement, which is messy to handle. It is therefore best to replace a grab bar or towel rack with a type that can be screwed into the wall. A light soap dish can be easily applied with tile adhesive; select one without a grab handle, so that you will not be tempted to pull yourself up on it.

Bathing Accessories

To replace a soap dish, first remove the dish from the wall. With a utility knife, score the grout around the soap dish. Protect the adjacent tiles by covering their edges with masking tape. Then, wearing goggles, lightly hammer the broken parts of the dish to loosen them. Set a cold chisel in the groove made by the knife and tap it to force out the dish. Remove the old grout and tile adhesive.

Select a replacement dish that will take up exactly the same number of tile spaces as the old one. Attach the replacement by applying a coat of tile adhesive to the back of the soap dish, then hold it in place with masking tape until the adhesive sets. Wait at least 24 hours for the cement to dry thoroughly, then seal the joints with grout.

Replacing a grab bar or towel rack is just as simple. If a grab bar or towel rack breaks, do not gouge out the cement or remaining ceramic piece, but try to get it as flush as possible with the surrounding tiles. Protest the tile with masking tape and, wearing goggles, use a hammer and cold chisel, then the sanding attachment on an electric drill to remove as much protrusion as possible.

Replacing Ceramic Accessories in the Bathroom

http://bastmattressesboxsprings.blogspot.com/ http://buycellphonesmotorola.blogspot.com/